HMP-1817E 6 (9/18)
7) Coolant
a) Density of coolant
In case of using water-soluble coolant, please control the density of coolant to more than
2%.
b) Temperature of coolant
Please use coolant within the range of 0 60 of temperature.
c) Pollution degree
We recommend you use coolant filtered by about 20 30 m filter.
d) Water-insoluble cutting fluid
-
Other types may damage the pump.
8) Operation environment
! DANGER
: Please do not use in explosive atmosphere.
.
Please do not use in unusual environment such as high temperature and high humidity , etc..
Otherwise, it may cause a risk of fire and human injury.
Please use under the following conditions.
Ambient temperature: -15 50
Relative humidity : 0 95%RH
This product is intended for indoor use.
Please contact us for use under special environment.
To Next Page
Loading...
