Parts
Number
3.1 1 Adsorber assembly F300138A
3.2 1 Gas temperature thermistor 267049A
3.3 1 Cable assembly with water temperature switches 267039B
3.4 1
Water Fitting Kit, including:
(2) Elbow, 90° Swivel, brass, ½” hose barb to ½” BSP, Serto
P/N TPD 4050, P/N 300342A
267129A
3.5 1 Cold Head Cable, F70 Compressor to SC-10, Amphenol to
Amphenol connector, 13.5 m lg. (factory use only)
267053C44
3.6 1 Cold Head Cable, F70 Compressor to RDK-408L2, Amphenol
to Amphenol connector, 20 m lg. (factory use only)
267017C65
3.7 1
Cold Head Cross Mix Extension Cable, 0.3 m lg., Amphenol to
Harting connector and cross phased wiring, used when
retrofitting F-70 in place of an Leybold CP6000 compressor
and connecting to Leybold RGD-5100 CH cable.
267052C1
3.8 1
Cold Head Extension Cable, 0.15m lg., Amphenol to Harting
connector, used when retrofitting F-70 in place of an HC-10
and connecting to SC-10 cable.
267064C0.5
3.9 1 Front locator plate 300050C
3.10 2 Slide rail 267033B
3.11 4 Caster 49137
3.12 3 Eyebolt 73216
3.13 2 Gasket face seal, 8M Aeroquip coupling 77002
Number
4.1 1 Charge and vent tool kit, including
(1) Charge and vent tool, #4F x ¼” Swagelok
(1) Bleed adapter assembly
267190A
267191A
267192A
4.2 1
Spanner Wrench Kit, including
(1) Wrench, 1-3/16” open end, crowfoot, P/N SK12463C
(1) Wrench, 1-1/8” open end x 5/8” open end, P/N SK30017C2
(1) Wrench, 1” open end x 3/4” open end, P/N SK30017C3
267130A
To Next Page
Loading...
