Specifications
Installation Tools
Properly sized open-end wrenches are needed to install and remove gas lines. SCAI can
furnish (optional) one each:
Wrench, 1" open end x 3/4" open end
Wrench, 1 1/8" open end x 5/8" open end
Wrench, 1 3/16" open end x 1 3/16" ratchet
P/N SK30017C3
P/N SK30017C2
P/N SK30017C1
For MRI systems with an RF shield, gas feedthroughs may be furnished for gas line installation through
the shield. Special wrenches may be required to fit the feedthroughs.
To Next Page
Loading...
