Sumitomo Hansen P4 User Manual













Sumitomo Hansen P4 Specifications

General

Type	Planetary Gearbox
Series	P4
Input Options	hydraulic motor
Mounting Position	Horizontal, Vertical
Housing Material	Cast iron
Gear Material	Case-hardened steel
Lubrication	Grease or oil
Protection Class	IP65

Summary

DESCRIPTION

HANSEN M4 ACC GEAR UNITS FOR AIR COOLED CONDENSER DRIVES

Detailed description of Hansen M4 ACC gear units for air cooled condenser drives.

RÉDUCTEURS HANSEN M4 ACC POUR COMMANDE DES VENTILATEURS DES CONDENSATEURS A AIR

REDUCTORES HANSEN M4 ACC PARA LAS TRANSMISIONES DEL VENTILADOR DE CONDENSADORES DE AIRE

HANSEN P4 GEAR UNITS FOR AIR COOLED CONDENSER DRIVES

HANSEN P4 GEAR UNITS FOR COOLING TOWER DRIVES

RÉDUCTEURS HANSEN P4 POUR COMMANDES DES AEROREFRIGERANTS

SELECTION

Mechanical power rating

Procedure for selecting gear units based on mechanical power rating and ratio.

Thermal power rating

Procedure for selecting gear units based on thermal power rating.

Puissance mécanique nominale

Procedure for selecting gear units based on mechanical power rating and ratio.

Puissance thermique

Procedure for selecting gear units based on thermal power rating.

Thermal check

Temps de démarrage total tS

Contrôle thermique

COMMANDES DES AEROREFRIGERANTS

Selection process for fan drives for air coolers.

Thrust load

Procedure to check thrust load (Fx) against permissible thrust load (FxN).

Charge axiale

REQUEST FOR QUOTATION

AIR COOLED CONDENSER DRIVES

Form for requesting quotations for air cooled condenser drives.

COOLING TOWER DRIVES

Form for requesting quotations for cooling tower drives.

1. LOAD PARAMETERS

5. INSTALLATION PARAMETERS

AUSWAHL

mechanische Nennleistung

Procedure for selecting gear units based on mechanical power rating and ratio.

Wärmegrenzleistung

Procedure for selecting gear units based on thermal power rating.

Mechanische Nennleistung

Procedure for selecting gear units based on mechanical power rating and ratio.

Thermische Kontrolle

KÜHLTURMANTRIEBE

Selection process for gear units used in cooling tower drives.

Axialkraft

ANFRAGE

VENTILATORANTRIEBE IN LUFtkondensatoren

Form for requesting offers for air condenser fan drives.

VENTILATORANTRIEBE IN KÜHLTÜRMEN

Form for requesting offers for cooling tower fan drives.

1. BELASTUNGSPARAMETER

5. EINBAUPARAMETER

SELECCION

Potencia mecánica nominal

Procedure for selecting gear units based on mechanical power rating and ratio.

Potencia térmica

Procedure for selecting gear units based on thermal power rating.

Carga axial

DEMANDE D'OFFRE

1. PARAMETRES DE PUISSANCE

PETICION DE OFERTA

LAS TRANSMISIONES DEL VENTILADOR DE LA TORRE DE REFRIGERACIÓN

Form for requesting offers for cooling tower fan drives.

1. LOS PARÁMETROS DE CARGA

5. PARAMETRES D'INSTALLATION