STEP 3
Unit should look as opposite.
Unscrew the Handle Bar Spring Knob.
A
djust the height of the handle bar to allow
you to rest your hands on to keep your
balance.
Please note only adjust height of handle bar
w
hilst standing on the ground.
Never attempt to adjust height of handle
bars whilst standing on the Summers
Leg Master Slim.
STEP 1
Remove from box all components and
lay them out.
R
elease Knob on front of Central Base
Support.
Insert Handlebar Base Pole and tighten.
STEP 2
Insert Flexible Handlebar into
Base Pole.
T
ighten all Knobs before use.
Maximum 15 degrees up and down bend
.
The correct use of the flexible handlebar
involves light pressure with the fingertips.
The flexible handlebar is designed to be bent
at a maximum angle of 15°, both on the
upward lift and the downward flex.
You will be amazed at how effective it is even seated.
If necessary start seated to get you going if over 350lbs.
Handlebar
Spring Knob on
Front of Central
Base Support
Handlebar
Spring Knob
Handlebar
Spring Knob
SUMMERS LEG MASTER SLIM
TM
is a registered trademark of Neil Summers/Enanef Ltd.
To Next Page
Loading...