18
Installing a Stainless Steel Handle
This appliance includes a stainless steel handle that is not required to operate the unit. To install the
handle, follow the instructions below:
Locate the handle (1) over the mounting stub (3) of the door
and using the supplied Allen key, tighten the securing grub
screws (2) to fix the handle.
(Only for models ASDW1522, LAWC1543, ADWC1552,
SDW1527, LWC1547, SDWC1556, ASDW2412,
LAWC2431, ADWC2442, SDW2416, LWC2435 and
SDWC2446)
1. Remove the door gasket (2) on the side you wish to
install the handle - you can see two designated holes for
handle installation.
2. Install the handle (4) tightly as shown above with the two
screws (1) and flat washers (3) provided.
3. Replace the door gasket.
To Next Page
Loading...
