Need help?Do you have a question about the Sumner 2000 Series and is the answer not in the manual?
Details the components and assembly of the upper and lower mast sections for the lift.
Components and assembly instructions for the carriage mechanism of the lift.
Components and assembly for the mast brake system, including safety brake kit.
Parts and assembly for the standard fork attachment, including weldments and springs.
Components for adding fork extensions, including weldments, rods, pins, and springs.
Components and assembly for the lift's base, including casters and weldments.
Details the front leg components, including weldments, casters, rollers, and hardware.
Components and assembly for the outrigger supports, including legs, tubes, and wheels.
Parts and assembly for the 10-inch wheel kit, including axle, support, and hardware.
Components and assembly for the leg lock mechanism, including plunger, spring, and split ring.
Components and assembly for the NL winch, including drum, shaft, brake, and handle parts.
Parts and assembly for the mast hold-down device, including weldment, spacer, and springs.
Components for the 2-speed handle assembly for MX and NL winches.
Components for the standard handle assembly for MX and NL winches.
Components and assembly for the outrigger lock mechanism, including tube, finger, and springs.
Parts and assembly for the outrigger lock kit, including support tube and lock assembly.
Components and assembly for the spreader plate, including weldment, sheave, and roller shaft.
General| Brand | Sumner |
|---|---|
| Model | 2000 Series |
| Category | Lifting Systems |
| Language | English |
To Next Page
