Fittings
7
4.7 Sliding tube stop
The sliding tube stops limit the sunshade inclination.
They prevent the sunshade being adjusted to too great
an inclination.
4.8 Floor sleeve
The floor sleeve is fitted to the bottom of the sunshade
stand tube.
It is used to centre the stand tube in the floor stand
and ensures that the sunshade is stably mounted.
4.9 Protective cover
The protective cover, made of weather-resistant PE
fabric, protects the sunshade from damage to the
frame arms and the canopy material in any weather.
Despite this the sunshade should not be left out in the
open in extreme weather conditions such as storms or
heavy frost, but should be kept in a dry and protected
location.
To Next Page
Loading...
