Sun Microsystems GDM-5410 User Manual

CHASSIS
SERVICE MANUAL
SPECIFICATIONS
GDM-5410
G1
Japan Model
N.Hemisphere Model
S.Hemisphere Model
Chassis No. SCC-L22L-A
COLOR GRAPHIC DISPLAY
CRT 0.24 mm aperture grille pitch
21 inches measured diagonally
90-degree deflection
FD Trinitron
Viewable image size Approx. 403.8 × 302.2 mm (w/h)
(15.9 × 11.9 inches)
19.8" viewing image
Recommended resolution Horizontal: 1280 dots
Vertical: 1024 lines
Standard image area Approx. 388 × 291 mm (w/h)
(15
1
/ 4 × 11
1
/ 2 inches)
or
Approx. 364 × 291 mm (w/h)
(14
3
/ 8 × 11
1
/ 2 inches)
Deflection frequency* Horizontal: 30 to 121 kHz
Vertical: 48 to 160 Hz
AC input voltage/current 100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
Power consumption Approx. 145 W
Dimensions
Approx. 501 × 498 × 498 mm (w/h/d)
(19
3
/ 4 × 19
5
/ 8 × 19
5
/ 8 inches)
Mass Approx. 32 kg (70 lb 9 oz)
Plug and Play DDC1/2B/2Bi, GTF**
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.3 µsec.
• Vertical blanking width should be more than 450 µsec.
** If the input signal is Generalized Timing Formula (GTF)
compliant, the GTF feature of the monitor will automatically
provide an optimal image for the screen.
Design and specifications are subject to change without notice.

Sun Microsystems GDM-5410 Specifications

General

Brand	Sun Microsystems
Model	GDM-5410
Category	Monitor
Language	English

Summary

Specifications

CRT

Details about the Cathode Ray Tube, including aperture grille pitch and deflection angle.

Viewable Image Size

Specifies the dimensions of the visible image area on the screen.

Recommended Resolution

Defines the optimal horizontal and vertical pixel counts for display.

Standard Image Area

Provides dimensions for the standard displayable image area.

Deflection Frequency

Lists the horizontal and vertical scan frequencies supported.

AC Input Voltage/Current

Specifies the monitor's power requirements.

Power Consumption

Indicates the typical power usage of the monitor.

Dimensions

Provides the physical measurements of the monitor.

Mass

States the weight of the monitor.

Plug and Play

Information regarding Plug and Play compatibility standards.

5-1. Block Diagrams

Connector Panel

Diagram of the input connector panel and associated signals.

U (Connector Board)

Block diagram of the connector board and its interface.

A (Video Amp, RGB Out)

Block diagram for video amplification and RGB output circuits.

D (Deflection)

Block diagram illustrating the deflection system.

N (µ-COM, V. Conv, H. Conv, LCC, Geo Magnetic Sensor)

Block diagram for microcomputer, conversion, and sensor functions.

G (Power Supply)

Block diagram of the power supply unit.

H3 (User Control)

Block diagram for user control interface and buttons.

H4 (Input Select)

Block diagram of the input signal selection circuitry.

5-2. Frame Schematic Diagram

U (Connector Board) Frame

Overall frame schematic showing U board connections.

G (Power Supply) Frame

Overall frame schematic showing G board connections.

A (Video Amp, RGB Out) Frame

Overall frame schematic for A board functions.

C Block (CRT Socket) Frame

Frame schematic for CRT socket and related components.

N (µ-COM, V. Conv, H. Conv, LCC, Geo Magnetic Sensor) Frame

Frame schematic for N board and its integrated circuits.

D (Deflection) Frame

Overall frame schematic for the D board deflection system.

H3 (User Control) Frame

Frame schematic of the H3 user control board.

H4 (Input Select) Frame

Frame schematic of the H4 input select board.

(1) Schematic Diagram of A Board

A Board Waveforms

(2) Schematic Diagrams of H3, H4 Boards

(3) Schematic Diagram of D Board

(4) Schematic Diagrams of N Board

(5) Schematic Diagram of G Board

(6) Schematic Diagrams of J1, U Boards