Sun Microsystems GDM-5010PT User Manual

CHASSIS
SERVICE MANUAL
SPECIFICATIONS
N. Hemisphere Model
S. Hemisphere Model
Korea Model
Japan Model
Chassis No. SCC-L04F-A
GDM-5010PT
N3
COLOR GRAPHIC DISPLAY
Picture tube 0.25 – 0.27 mm aperture grille pitch
21 inches measured diagonally
90-degree deflection
Viewable image size Approx. 403.8 × 302.2 mm (w/h)
(16 × 12
inches)
19.8” viewing image measured
diagonally
Resolution Horizontal: Max. 1600 dots
Vertical: Max. 1200 lines
Standard image area Approx. 388 × 291 mm (w/h)
(15
3
/ 8 × 11
1
/ 2 inches)
or
Approx. 364 × 291 mm (w/h)
(14
3
/ 8 × 11
1
/ 2 inches)
Deflection frequency Horizontal: 30 to 96 kHz
Vertical: 48 to 160 Hz
AC input voltage/current
100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
Power consumption Max. 160 W
Dimensions 500.3 × 502.5 × 476.5 mm (w/h/d)
(19
3
/ 4 × 19
7
/ 8 × 18
7
/ 8 inches)
Mass Approx. 31 kg (68 lb 5 oz)
Design and specifications are subject to change without
notice.

Sun Microsystems GDM-5010PT Specifications

General

Screen Size	21 inches
Display Type	CRT
Maximum Resolution	1600 x 1200
Aspect Ratio	4:3
Viewable Size	19.8 inches
Dot Pitch	0.25 mm
Vertical Refresh Rate	50 - 160 Hz
Input Video Signal	Analog RGB
Horizontal Refresh Rate	30 kHz
Input Connectors	VGA
Weight	28 kg

Summary

Specifications

Safety Check-Out

Leakage Test

Procedure for testing AC leakage current from exposed metal parts to ground.

Power Saving Function

Diagnosis

Explanation of power LED indicators for different failure conditions.

Timing Specification

General

Identifying Parts and Controls

Identifies and describes the front and rear controls and indicators of the monitor.

Getting Started

Instructions for initial setup, connecting the monitor to a computer and power.

Customizing Your Monitor

Adjusting Picture Brightness and Contrast

Guide to adjusting monitor brightness and contrast settings via OSD.

OSD Control Functions

Covers input signal selection and OSD language settings.

OSD Picture Adjustments

Covers centering, size, and geometry adjustments using OSD.

OSD Advanced Adjustments

Covers zoom, color, and screen settings via OSD.

Using the Option On-screen Display

Manual degauss, OSD position, power saving delay, and control lock settings.

Setting the power saving delay time

Configures the delay before the monitor enters power saving mode.

Locking the controls

Disables front panel buttons to prevent unauthorized changes.

Resetting the Adjustments

Resetting Adjustment Items

Resets individual OSD settings or all data to factory defaults.