Sun Microsystems StorEdge 3000 Series Manual

Best Practices for the Sun StorEdge 3510 and 3511 FC Arrays 23
■ Three SFP modules to support five connections (Sun StorEdge 3511 SATA array
only)
■ Four SFP modules to support six connections (Sun StorEdge 3511 SATA array
only)
■ Using two single-port FC host bus adapters (HBAs) or a dual-port 2-Gbit FC HBA
in single-server or dual-server configurations makes optimum use of the Fibre
Channel array’s performance. Mapping logical drive partitions to two paths while
using multipathing software and load balancing provides the best performance.
Non-Redundant DAS Setup Details
FIGURE 5 and FIGURE 6 show a Sun StorEdge 3500 series arrays in a non-redundant
configurations.
FIGURE 5 Sun StorEdge 3510 FC Array Non-Redundant DAS Connections
Server 1
Server 2
Server 4
Server 3

Sun Microsystems StorEdge 3000 Series Specifications

General

Brand	Sun Microsystems
Model	StorEdge 3000 Series
Category	Storage
Language	English