-6-
DRY IRONING
1. Insert the plug in the electrical wall socket.
2. Make sure that the Steam Select Switch is in the closed position .
3. After the Indicator Light goes off, you may start to iron.
STEAM IRONING
Steam ironing is only possible at high temperatures (silk, wool, cotton, linen),
as indicated on the Temperature Control Dial (figure 3).
1. Be sure that there is enough water in the
Reservoir.
2. Set the iron in an upright position.
3. Plug the steam Iron into the wall electrical outlet.
4. Turn the Temperature Control Dial to the desired
position within the range of temperatures
included in the steam area of the dial.
5. Wait until the Indicator Light has turned off after
lighting up.
6. Set the Steam Select Switch to the desired
steam level position. You are now ready to start
steam ironing. The steam will be released evenly
through vents located in the soleplate for easier ironing.
SPRAY MIST
The Spray Mist feature is a powerful water spray mist that dampens the fabric
to help remove wrinkles from heavy fabrics and to set creases.
1. Press the Spray Mist button firmly to start the spray.
(gure 3)
To Next Page
Loading...
Need help?
General
