EasyManuals Logo

Sunbeam 32610080 User Manual

Sunbeam 32610080
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
-8-
IRONING TEMPERATURE
Check the ironing instructions on the label of the items that you wish to
iron. Check the temperature setting table for further instructions.
Should the specific itoning instructions not appear on the label, follow
instructions on the temperature setting table. This table is only for fabrics
indicated and does not apply to special textiles with a gloss finish, etc.
Textiles with special coatings (such as gloss, relief wrinkles, etc.) are best
ironed at very low temperatures. If the textile consists of several different
type of fibers, always select the lowest temperature, i.e the temperature
recommended for the most delicate fiber in the composition (for example, if
the composition consists of 60% polyester and 40% cotton, you should iron
at the temperature indicated for polyester).
SETTING THE TEMPERATURE
1. Set the iron in on upright position.
2. Connect the Iron to an electrical wall socket.
3. Set the Temperature Control dial (figure 4) to the correct ironing
temperature as indicated on the label or the temperature settings table.
(gure 4)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sunbeam 32610080 and is the answer not in the manual?

Sunbeam 32610080 Specifications

General IconGeneral
BrandSunbeam
Model32610080
CategoryIron
LanguageEnglish

Related product manuals