Contents [ hide
1 Sunbeam’s Safety Precautions
2 Features of your Sunbeam Belle-Aqua™
Kettle
3 Using your Sunbeam Belle-Aqua™ Kettle
4 Sunbeam’s 3-Way Safety System
5 Care and Cleaning
6 12 Month Warranty
7 File Downloads
8 References
9 Related Manuals
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR SUNBEAM KETTLE
Always operate the kettle on a flat, level surface.
Boiling water will scald. Do not leave a boiling or hot kettle near or where children may touch it.
Do not leave the power cord near the edge of a bench top where children may touch or pull it.
Boiling water may be ejected, if overfilled.
Always ensure lid is securely closed to ensure correct operation of the kettle.
Do not operate the kettle without water.
Always turn the power off and unplug the cord while the kettle is NOT in use.
Your kettle must only be used with the power base supplied.
Do not move kettle while switched on.
Never fill above the ‘max’ indication as hot water may be ejected.
Always store excess cord in the storage facility underneath the power base.
Always be aware of steam being emitted from the spout or lid especially during refilling.
Do not use the kettle to heat anything other than water.
Avoid spillage on the connector.
Do not use an appliance for any purpose other than its intended use.
The heating element surface is subject to residual heat after use.
Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential
that the product user also exercise care when using an electrical appliance. Listed below are precautions
which are essential for the safe use of an electrical appliance:
Read carefully and save all the instructions provided with an appliance.
Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug
To Next Page
Loading...
