To Next Page

To Previous Page

Using the Crumpet Function

Step 1. Turn the Function Dial to the Crumpet function. When

you select the Crumpet function, the 1-7 colour shade

setting indicator will become visible on the LCD. The upper

and lower heating elements will heat. Default Colour Shade

Setting is 4. This will be the default every time the oven

is unplugged and plugged back on. If the oven remains

plugged-in since the last time you have selected a different

shade for the Crumpet

function (even if not activated),

the oven will remember the last shade setting you selected.

NOTE:

The middle rack position is recommended for crumpet

toasting. The temperature is not adjustable for the Crumpet

function. The time adjusts automatically with shade

adjustment. The temperature or time is not adjustable

during the Crumpet function.

Step 2. To adjust the shade colour:

Turn the Time Dial to adjust the shade colour. The colour

shade-setting indicator will show your selection as you turn

the knob.

Step 3. To Start:

Press the Start/Cancel Button to start the crumpet toasting

process. The red Start/Cancel Button light will illuminate.

The LCD Display will show the Crumpet Function, the shade

colour selection and the countdown time. The oven will

begin to work and the timer will start counting down. When

the Crumpet toasting is complete, the oven will emit 3

‘beeps’. The LCD and the Start/Cancel Button Light will turn

off after 30 seconds.

NOTE: You can cancel the crumpet toasting cycle at any time by

pressing the Start/Cancel Button once. The red Start/Cancel Button light will turn off

whenever a function has been completed or a function is manually cancelled.

Sunbeam BT7100 User Manual

Questions and Answers: