Sunbeam Dehumidifiers - Installation; Installation Guidelines; Operation Instructions; Operating Conditions

5
INSTALLATION
Install the dehumidifi er in a fl at and spacious location
where the air outlets will not be covered.
Do not install underneath desks or inside cupboards, as
this will restrict air fl ow.
•
•
OPERATION INSTRUCTIONS
OPERATING CONDITIONS:
This dehumidifi er is designed to operate with a working environment between 41°F - 95°F (5°C
- 35°C).
If the dehumidifi er has been turned off and needs to be turned on again quickly, wait three minutes
for the correct operation to resume.
Do not connect the dehumidifi er to a multiple socket outlet that is being used with other electrical
appliances.
Select a suitable location to place the dehumidifi er, making sure you have easy access to an electrical
outlet.
Plug the dehumidifi er into an 115V~60Hz grounded electrical socket.
Ensure the water tank is properly fi tted or the dehumidifi er will not operate correctly.
TURNING THE DEHUMIDIFIER ON AND OFF:
Plug the power cord into the electrical outlet.
Press the POWER button to turn on the dehumidifi er.
Adjust the humidity level by pressing the + and - buttons. The dehumidifi er defaults to 60%
humidity.
Press the POWER button again to turn the unit off.
•
•
•
•
•
•
•
•
•
•