Sunbeam FA7550 - Assembling the Tower Fan; Base Assembly and Remote Control Setup

6
Assembling Your Tower Fan
Join the two halves of the base together
Feed the cord between the two halves of the
base.
Clip the two halves of the base together,
ensuring the cord remains within the channel
f
See figure 1.
ormed when the two halves come together.
1.
2.
Remote Control
The remote control requires a CR2025 battery.
There is a slot to on the back of the unit to
store the remote control when it is not in use.
See figure 2.
CR2032
Figure 1 Figure 2
3