Assembling your juicer (continued)
5. Secure the juicer cover by raising the twin-
locking handles and clip the tops to the
juicer cover. Press firmly on the lower part
of the twin-locking handles to lock into
place – figure 5.
6. Slightly tilt the pulp container and
slide into place under the juicer
cover – figure 6.
Tip: To reduce cleaning we recommend that
you line the pulp container with a plastic bag
to collect the pulp.
7. Take the food pusher, align the groove
on the food pusher with the notch on
the inside of the feed chute and
slide the food pusher down into
the feed chute – figure 7.
Figure 7
Figure 5
Figure 6
8
To Next Page
Loading...
