1. Needle Clamp
2. Bobbin Compartment
3. Needle
4. Take-up Lever
5. Tension Screw
6. Thread Spindle
7. Bobbin Holder
8. Hand Wheel
9. On/Off Switch
10. Speed Button
11. Battery Compartment
12. DC Jack
13. Foot Pedal Jack
14. Presser Foot Lever
15. Bobbin Winder
1. Make sure the OFF before inserting batteries.
2. Put 4 AA batteries into the battery compartment on the bottom of the machine.
3. Turn ON the sewing machine and the machine will start sewing immediately
(note: if the machine is used with included pedal, the machine should stay on
OFF. It will only work when you push down the pedal).
4. Make sure the machine is properly threaded and fabric is in the right position for
sewing before you turn the machine on.
To Next Page
Loading...
