Sunbeam Sleep Perfect - Page 15

13
Figure 5.
Fitting your electric blanket (continued)
Connecting the controls
Toconnectthecontrols,liftonecornerofthe
blanketneartheheadofthebedtoexpose
theconnectorsocket.Withthecontrolset
to the off position, pass the control cord
through the triangular hole in the fitted skirt
and insert the connector plug into the socket.
Ensure it is firmly clicked into position.
Repeatontheothersideifrequired.Plugthe
controlsintoa230-240Vpoweroutletand
turn the power on.
Note: Ensure that the controls are connected
to the blanket before inserting the power cord
into the power outlet. Connecting the power
before attaching the controls to the blanket
will replicate a power interruption and
activate the safety system, preventing your
blanket from heating.
Caution: Thecordandcontrolsmustbekept
outsidethebedandawayfromexternal
heating sources such as heaters and lamps.
Donotcoverthecontrol.