Sunbeam Sleep Perfect - Using Your Electric Blanket; Before First Use; Using 9 Heat Control with Timer

Before first use
Before using your electric blanket for the first
time, Sunbeam recommends that you switch
theblankettomaximumheat(setting9)for
two to three hours to evaporate any moisture
inthemattress.Repeatthisprocessevery
few months to maintain a dry, healthy bed.
Your electric blanket control has nine heat
settings, which are recommended for use as
follows:
1-3Low,gentleheatforallnightuse
4-6Mediumheat
7-9Highheat,forpreheatingonly
Usethehighheatsettingstopreheatyour
bedonly.Donotsleepwithyourblanketon
thesesettingsformorethan30minutes.
Using your 9 heat control with timer
Your timer control features a slide switch to
select the desired operating mode, plus an
easy to use dial to select the temperature
setting(seeFigure6).Theheatsettingdialis
illuminatedforeasyadjustmentinthedark.
75 minute setting
Usethe75minutesettingtopreheatyour
bedbeforehoppingin.Movetheslideswitch
tothe75minposition.Thetemperaturedial
will then illuminate enabling you to turn
thedialtoyourdesiredheatsetting.The
timerindicatorlight(positionednexttothe
slideswitch)willgoout,indicatingthatthe
blanket is on and heating.
Your electric blanket will automatically switch
offafter75minutes.Thetimerindicator
light will illuminate and the light in the
temperature dial will go out, indicating that
the timer period has elapsed and the blanket
is no longer heating.
Torestartthetimer,movetheslideswitch
totheOFFpositionandthenreturnittothe
desired timer position.
Using your electric blanket
Figure 6.
1
14