Suncast BMDB134004 - Assembly Steps 5-8; Attaching Front;Back Panels and Lid Bracket

1
NOTE: During assembly, position all parts with wicker side out. Insert
the two hooks on ( B) into either short side of ( A). Push straight down. You
may hear a " snap" when tabs are fully engaged. Use force to push down.
2
At an angle, insert the three hooks on ( C) into either long side of bottom ( A).
Rotate ( C) upright to lock the hooks.
Smooth Side Up
Insert the two tabs on ( C) into ( B).
hie
o
3
4
Insert the two hooks on ( B) into other short side of ( A). Push straight down. You
may hear a " snap" when tabs are fully engaged.
Repeat step 3 to connect ( B) to ( C).
6