Suncast BMS6583 - Shed Assembly - Roof Steel; Install Side Adapters on Right Side; Attach Wall Adapters

Shed Assembly/Roof Steel
18a
BACK
x2
11 1 11111114mm
Place one Side Adapter ( BB in poston on right side of interior door opening. Secure with 12 screws ( NN). Place one
side adapter ( BB) in position on back corner. Secure with 12 screws ( NN).
Note: Critical Orientation of bracket is shown and used in next steps. Repeat steps with the remaining two side
adapters ( BB) on left side of the shed interior.
Attach one wall adapter ( BB) to right side wall by sliding it in place from above. Secure with 14 screws ( NN).
Repeat steps with the remaining wall adapter ( BB) on left side of the shed interior.
19