Suncast BMS7775 - Page 19

Flex left front panel (C) corner hinge back and forth
several times.
With at least two people, align the tab on the bottom
of the left front panel (C) with the slot on floor front
(A). Lower the front panel into the slot and lock in
place by sliding toward the door opening.
Note: Use a rubber mallet to “push” left front panel
(C) into locked position (start with left front corner).
Tip the left front panel outward slightly. Bend the
corner hinge, then tip the panel back to vertical
position, making sure to align the lower tab on
corner hinge with the slot in the floor panel.
19