Suncast Tremont - Page 15

Shed Assembly/Walls ( continued)
Push left floor ( V) and right floor ( W) panels together and
secure with four screws ( X).
Note: Refer to pages 9 and 10 to secure floors to
foundation.
12
Tip left front corner ( E) outward slightly and bend corner
hinge.
Align tab on bottom of left front corner ( E) with slot on
left floor ( V). Lower panel into slot and lock in place by
sliding panel toward door opening.
7
Note: Use a rubber mallet to " push" left front corner
(E) into locked position.
Tip left front corner ( E) back to vertical position and
align lower tabs on right side with slots in floor ( V).
Note: You will hear a snap when tab is fully engaged.
15