Need help?Do you have a question about the Sundance Spas 780 and is the answer not in the manual?
General| Brand | Sundance Spas |
|---|---|
| Model | 780 |
| Category | Hot Tub |
| Language | English |
Specific safety guidelines for Canadian installations, including grounding and bonding.
Explanation of hyperthermia, its causes, symptoms, and risks associated with spa use.
General warnings and advice for specific user groups and spa operation.
Critical instructions for safe electrical installation and operation of the spa.
Considerations for choosing an ideal outdoor location for your spa.
Specific considerations for proper ventilation and placement in an indoor setting.
Detailed steps for filling the spa with water, including water type recommendations.
Ensuring all pump unions are tight before powering on the spa.
Instructions for applying power to the spa via the circuit breaker.
Steps to start water circulation and activate jets for initial system check.
Guidance on adding initial chemicals for water treatment.
Importance of using the cover to maintain heat and reduce operating costs.
Detailed explanation of the LED display, buttons, and indicators on the control panel.
Diagram and identification of spa features, jet types, and controls.
Adjusting the spa's water temperature using the control panel buttons.
Operating the 1-speed and 2-speed jets pumps for massage and circulation.
Activating and deactivating the spa's underwater light.
Customizing the massage experience by diverting water to different jet groups.
How to adjust flow stream and volume for rotating jets.
Adjusting the flow stream angle for non-rotating jets like SMT Turbo.
Using air controls to introduce air into jet streams for enhanced massage.
Information on the features and operation of the optional audio system.
Details on standard modes for colder climates, maintaining water temperature.
Details on economy modes for warmer climates, optimizing energy use.
Using lock modes for spa service or preventing unauthorized use.
Instructions on how to select filtration modes and lock modes.
Step-by-step guide for cleaning and maintaining the spa's filter cartridges.
Procedure for draining and refilling the spa water every 3-6 months.
Tips for cleaning the spa's interior surface without causing damage.
Instructions for removing, cleaning, and maintaining the spa pillows.
Best practices for cleaning and preserving the spa cover's lifespan.
Troubleshooting and cleaning steps for sticky rotating jets.
Simple cleaning instructions for the spa's synthetic cabinet.
Procedures to protect the spa from freezing during cold weather or prolonged non-use.
Guidance on safely restarting a spa that has been exposed to freezing temperatures.
Understanding and maintaining the correct pH balance for spa water.
Methods and recommended sanitizers for destroying bacteria and organic compounds.
Information on advanced water purification systems.
How the spa reacts to high ambient temperatures to prevent overheating.
Warning and troubleshooting for when the spa water temperature is too high.
Meaning of the SN1 error message related to temperature sensors.
Meaning of the SN2 error message related to temperature sensors.
Interpreting FL1/FL2 error messages related to flow switch or filter issues.
Meaning of the COL error message indicating a cool condition.
Meaning of the ICE error message indicating a freeze protection activation.
Meaning of the '---' error message indicating watchdog software trigger.
Steps to diagnose why the spa's components are not turning on.
Troubleshooting steps when the pump is not working but the light is.
Diagnosing and fixing issues related to reduced jet performance.
Procedure to address the spa water being excessively hot.
Troubleshooting steps for when the spa is not heating.
To Next Page