Need help?Do you have a question about the Sundance Spas Solo and is the answer not in the manual?
General| Brand | Sundance Spas |
|---|---|
| Model | Solo |
| Category | Hot Tub |
| Language | English |
Details on spa control system functions and startup sequence.
Instructions for setting up filter cycles on Tango, Caprio, and Caprio ST models.
Specific safety guidelines for electrical installation and grounding of the spa.
Factors to consider when choosing an outdoor site for the spa.
Considerations for installing the spa in an indoor environment, including ventilation.
Instructions on how to properly fill the spa with water.
Important checks to perform after filling and before initial operation.
How to start the water circulation system and prime the pump.
Guidance on adding initial chemicals for water treatment.
Instructions for adjusting the spa's water temperature setpoint.
How to operate the spa's pump using the jets button.
How to turn the underwater spa light on and off.
Operation of diverter valves and air controls for Solo model jets.
Operation of diverter valves and air controls for Tango model jets.
Operation of diverter valves and air controls for Caprio/ST models.
Guide to selecting different filter cycles (Standard, Economy, Lock) for the spa.
Explanation of Lock Out and Lock Mode functions for security and maintenance.
Instructions for cleaning and maintaining the spa's filter cartridges.
Procedures for safely draining and refilling the spa.
How to clean the spa's interior surfaces to preserve finish.
Instructions for cleaning and maintaining the spa's pillows.
Tips for caring for the spa's insulating cover to maximize its lifespan.
Guidance on preserving and maintaining the spa's wood cabinet finish.
Procedures for preparing the spa for winter or periods of non-use to prevent freeze damage.
Importance and methods for keeping spa water balanced and sanitary.
Explanation of pH measurement and its importance for spa water chemistry.
Guidance on using sanitizers and other additives for water treatment.
Explanation of the "summer logic" feature that manages temperature during hot weather.
How to identify and correct an "OH" overheat condition in the spa.
Troubleshooting for "SN1" error, indicating a sensor issue.
Troubleshooting for "SN2" error, indicating a temperature sensor malfunction.
Troubleshooting for "FL1" or "FL2" errors related to the flow switch.
Information on the "COL" display indicating a cool temperature condition.
Explanation of the "ICE" display for freeze protection mode.
Troubleshooting for "---" display, indicating a system watchdog activation.
Steps to take when the spa's components do not turn on.
Troubleshooting steps when the pump isn't working but the light is functional.
Tips for improving weak or uneven jet performance.
How to address situations where the spa water is excessively hot.
Steps to troubleshoot issues where the spa is not heating properly.
List and diagram of parts for the Solo model equipment pack.
List and diagram of parts for the Tango model equipment pack.
List and diagram of parts for the Caprio/ST model equipment pack.
Overhead diagram identifying components for the Solo model.
Overhead diagram identifying components for the Tango model.
Overhead diagram identifying components for the Caprio/ST models.
Detailed specifications including dimensions, capacity, and features for the Solo model.
Detailed specifications including dimensions, capacity, and features for the Tango model.
Detailed specifications for Caprio and Caprio ST models.
To Next Page