Sundance Spas 880 Series

Questions and Answers

D
Dalton McdonaldAug 17, 2025
What to do if Sundance Spas Hot Tub water is too hot?
- C
  christophercastanedaAug 17, 2025
  If the water in your Sundance Spas hot tub is too hot, do not enter the water. Remove the hot tub cover to speed up the cooling process. You can also reduce the thermostat setting or switch the hot tub to "Economy" mode to only heat during programmed filter cycles.
W
woodsharoldAug 20, 2025
Why is my Sundance Spas 880 Hot Tub not heating?
- J
  Jacqueline BoydAug 20, 2025
  If your Sundance Spas hot tub isn't heating, check the thermostat setting and ensure the cover is in place while heating. If the "heater on" indicator is lit but the temperature doesn't rise after a while, contact a qualified service technician.
B
Brandon WeberAug 22, 2025
What to do if my Sundance Spas 880 Hot Tub pump does not operate?
- W
  Warren NguyenAug 22, 2025
  If the pump in your Sundance Spas hot tub doesn't operate, depress the JETS button. If you don't hear any sound or if there's a buzzing sound, turn off the power to the spa and contact a qualified service technician.
M
Matthew RoseAug 26, 2025
What to do if my Sundance Spas 880 Hot Tub filter/circulation pump is off?
- J
  John YoungAug 26, 2025
  If the filter/circulation pump cycle on your Sundance Spas hot tub was canceled due to a power interruption, wait 24 hours for the hot tub to reset. Alternatively, you can manually activate it by pressing the select button.
T
thomas22Aug 28, 2025
What to do if my Sundance Spas Hot Tub components don't operate?
- T
  Tina RobinsonAug 28, 2025
  If none of the components in your Sundance Spas hot tub are operating (pump, blower, light, etc.), check the household circuit breaker.
A
Allison JohnsonAug 31, 2025
What to do if Sundance Spas 880 has proper water flow inhibited?
- A
  Adam BondAug 31, 2025
  If the proper water flow is inhibited in your Sundance Spas hot tub, check for the correct water level and inspect for a clogged filter.
S
Susan FordSep 2, 2025
What to do if Sundance Spas 880 Hot Tub has power fluctuation?
- M
  Michael GarciaSep 2, 2025
  If a power fluctuation in the secondary power line is causing the DC voltage to be low in your Sundance Spas hot tub, try resetting power to the spa. If the power level returns to normal, the PF error will reset itself.
M
Melinda YoungSep 5, 2025
What to do if my Sundance Spas 880 shows 'Overheat Protection'?
- L
  Leonard Contreras Jr.Sep 5, 2025
  If your Sundance Spas Hot Tub displays an overheat protection message, do not enter the water. Remove the hot tub cover to allow it to cool down faster. This issue occurs when the water temperature exceeds acceptable limits. If the problem continues, it is recommended to contact your Sundance Spas dealer or a qualified service technician.
C
Catherine ColemanSep 8, 2025
What to do if I see a 'FLOW SWITCH' error on my Sundance Spas 880?
- S
  stephanieevansSep 8, 2025
  If you see a FLOW SWITCH error on your Sundance Spas Hot Tub, it means the heater is deactivated, and possibly the filter/circulation pump too. This happens when the water flow is blocked or the flow switch isn't working right. First, make sure the water level is correct and check if the filter is clogged. If the problem persists, contact your Sundance Spas dealer or a qualified service technician.
D
Dylan BallSep 12, 2025
What to do if my Sundance Spas Hot Tub is showing a 'Power failure' error?
- A
  Ashley PopeSep 12, 2025
  If you get a 'Power failure' error on your Sundance Spas Hot Tub, try resetting the power to the spa. This issue is caused by power fluctuations in the secondary power line, leading to low DC voltage. If the power returns to normal, the error should clear. If the error reappears, contact your Sundance Spas dealer or a qualified service technician for assistance.