What to do if Sundance Spas Optima 880 water is too hot?
If the water in your Sundance Spas hot tub is too hot, do not enter the water. Remove the hot tub cover to speed up the cooling process. You can also reduce the thermostat setting or switch the hot tub to "Economy" mode to only heat during programmed filter cycles.
Why is my Sundance Spas Optima 880 not heating?
If your Sundance Spas hot tub isn't heating, check the thermostat setting and ensure the cover is in place while heating. If the "heater on" indicator is lit but the temperature doesn't rise after a while, contact a qualified service technician.
What to do if my Sundance Spas Hot Tub pump does not operate?
If the pump in your Sundance Spas hot tub doesn't operate, depress the JETS button. If you don't hear any sound or if there's a buzzing sound, turn off the power to the spa and contact a qualified service technician.
What to do if my Sundance Spas Optima 880 filter/circulation pump is off?
If the filter/circulation pump cycle on your Sundance Spas hot tub was canceled due to a power interruption, wait 24 hours for the hot tub to reset. Alternatively, you can manually activate it by pressing the select button.
General| Brand | Sundance Spas |
|---|---|
| Model | Optima 880 |
| Category | Hot Tub |
| Language | English |
To Next Page