SR570 supplied-air face shield — How to Copyright © 2020 by The S.E.A. Group 4
Lower the visor unit by pulling the face seal
down under your chin. A clicking sound indicates
that the visor unit has been lowered fully.
Insert a finger between your chin and the face
seal and run the finger along the contact surface
of the face seal all the way round to check that it
fits well against the face.
Make sure that the breathing hose runs along
your back and is not twisted.
Airflow deflector
The airflow can be directed towards visor or face
for optimal comfort.
Press the peel-off clip into the center of the side
of the visor.
To Next Page
Loading...
