Need help?Do you have a question about the Sundyne LMV-322 and is the answer not in the manual?
Overview of Sundyne centrifugal pumps, their performance, efficiency, and applications.
Explanation of symbols used in the manual for warnings, recommendations, and reminders.
Guidelines for wearing safety glasses, hearing protection, and steel-toed shoes.
Requirements for forklift operators and pre-operation checks.
Procedures for ensuring electrical safety during installation and maintenance.
Procedures for warning personnel before testing newly installed or repaired equipment.
Reviewing specification sheets, drawings, and manuals before startup.
Following installation and starting instructions from the driver manufacturer.
Checking utility connections, piping, and instrument settings before startup.
Immediate inspection of the product for shipping damage.
Protecting the pump from moisture and dust during short-term storage.
Precautions for long-term storage to prevent corrosion damage.
Components of the internal lube oil system: sump, pump, filter, and heat exchanger.
Pressurizing the double seal buffer loop or external seal flush before admitting fluid.
Filling the gearbox with lube oil to the correct level.
Throttling discharge valve to set pump to operating point.
Verifying parameters like pressure, temperature, flow rate, and NPSH against specifications.
Adjusting cooling flow to maintain gearbox sump temperature.
Overview of Sundyne centrifugal pumps, their performance, efficiency, and applications.
Explanation of symbols used in the manual for warnings, recommendations, and reminders.
Guidelines for wearing safety glasses, hearing protection, and steel-toed shoes.
Requirements for forklift operators and pre-operation checks.
Procedures for ensuring electrical safety during installation and maintenance.
Procedures for warning personnel before testing newly installed or repaired equipment.
Reviewing specification sheets, drawings, and manuals before startup.
Following installation and starting instructions from the driver manufacturer.
Checking utility connections, piping, and instrument settings before startup.
Immediate inspection of the product for shipping damage.
Protecting the pump from moisture and dust during short-term storage.
Precautions for long-term storage to prevent corrosion damage.
Components of the internal lube oil system: sump, pump, filter, and heat exchanger.
Pressurizing the double seal buffer loop or external seal flush before admitting fluid.
Filling the gearbox with lube oil to the correct level.
Throttling discharge valve to set pump to operating point.
Verifying parameters like pressure, temperature, flow rate, and NPSH against specifications.
Adjusting cooling flow to maintain gearbox sump temperature.
General| Brand | Sundyne |
|---|---|
| Model | LMV-322 |
| Category | Water Pump |
| Language | English |
To Next Page
