Sunex HD 7706 User Manual

7706 1 rev. 08/24/18
Capacity ................................Up to 40 gallon empty fuel tank
Overall Length .............................................................. 24-1/2"
Overall Width .......................................................................15"
Overall Height ............................................................... 7-3/16"
Tie Down Length ................................................................... 8'
SPECIFICATIONS
OWNER'S MANUAL
MODEL 7706
CAPACITY: UP TO 40 GALLON
EMPTY FUEL TANK
SADDLE ADAPTER
CONTENTS:
Page 1 Specifications
2 Warning Information
3 Setup Instructions
4 Operating and Preventative Maintenance
5 Parts list and Drawing
© Copyright 2018, Sunex Tools
®
Saddle Adjustments
Length .................................................. 24-1/2" to 39-3/4"
Width ...................................................................15" to 19"
Height ........................................................... 7-3/16" to 11"
Shipping Weight ............................................................ 52 lbs.

Sunex HD 7706 Specifications

General

Brand	Sunex HD
Model	7706
Category	Jacks
Language	English

Summary

Warning Information

Important: Read These Instructions Before Operating

Emphasizes the necessity of thoroughly reading and understanding the manual before device operation.

The Nature of Hazardous Situations

Explains inherent hazards associated with lifting devices and the need for careful, trained operators.

Methods to Avoid Hazardous Situations

Provides a list of critical safety procedures to prevent accidents and injuries during use.

Consequences of Not Avoiding Hazardous Situations

Outlines the severe outcomes, including injury or damage, resulting from non-compliance with safety guidelines.

Fuel Tank Saddle Adapter Setup

Installation on Under Hoist Transmission Jacks

Details how to install the saddle adapter on various types of transmission jacks.

Type 1 Installation

Describes adapter installation on Sunex models 7795/7796 with ratchet adjustment arms.

Type 2 Installation

Explains mounting on transmission jacks with removable flat saddles using provided hardware.

Type 3 Installation

Covers replacing stock saddles with an adapter plate for specific jack types.

Operating Instructions

Fuel Tank Preparation and Grounding

Steps for preparing the fuel tank and establishing proper electrical grounding for safety.

Adapter Adjustment and Tank Securing

Guidance on adjusting the adapter and securely fastening the fuel tank with tie-down straps.

Safe Lowering and Transport

Instructions for safely lowering the tank and ensuring it is free for transport.

Preventative Maintenance

Storage and Cleaning

Guidelines for storing the adapter in a protected area and cleaning its surfaces.

Label Maintenance

Instructions for keeping adapter labels clean and readable for user information.

Repair and Serviceability

Advice on not attempting repairs without qualifications and taking damaged units out of service.

Limited Warranty

Product Warranty Coverage

Details the one-year warranty for defects in workmanship and materials.

Exclusions and Limitations

Specifies what is not covered by the warranty, such as abuse and unauthorized repairs.

Warranty Service Procedure

Outlines the process for returning equipment for warranty service and required documentation.

Parts List and Drawing

Exploded View Drawing

Visual representation of the fuel tank saddle adapter with numbered components.

Parts Identification

A table listing part numbers, descriptions, and quantities for the adapter components.