How to fix Sunex HD 6622 if it will not lift rated load?
If your Sunex HD Jacks unit isn't lifting the rated load, you should purge air from the hydraulic system. Follow the procedure outlined under the SETUP section to ensure proper operation.
What to do if Sunex HD 6622 will not sustain rated load?
If your Sunex HD Jacks unit won't sustain the rated load or feels spongy, it is recommended to purge air from the hydraulic system. Follow the SETUP procedure to do this.
Why my Sunex HD 6622 unit will not lift to full height?
If your Sunex HD Jacks unit isn't lifting to its full height, you should purge air from the hydraulic system. Refer to the SETUP section for the correct procedure.
What to do if Sunex HD 6622 Jacks handle raises up under load?
If the handle of your Sunex HD Jacks tends to raise up while the unit is under a rated load, rapidly pump the handle several times. This action helps to push oil past the ball valves in the power unit, which may resolve the issue.
Explains inherent risks and hazards associated with portable automotive lifting devices.
Provides essential safety practices and precautions to prevent accidents during operation.
Outlines potential severe outcomes from ignoring safety warnings and instructions.
Details the procedure to remove air from the hydraulic system for proper function.
To Next Page
General