Sunex Tools 5207 User Manual

5207 1 rev. 09/16/20
Low Height ..........................................................................700 lbs.
Adjustable Hook Screw Length ................................................ 14"
Steel Cable Diameter ...............................................................1/8"
Support Bar Adjustment .............................................34.5" to 61"
Shipping Weight ............................................................ 25.24 Lbs.
SPECIFICATIONS
OWNER'S MANUAL
CONTENTS:
Page 1 Specifications
2 Warning Information
3 Setup, Assembly Instructions, and Operating Instructions
4 Maintenance, Owner/User Responsibility, Inspection and Warranty Information
5 Exploded View Drawing and Replacement Parts
© Copyright 2020, Sunex Tools
®
MODEL 5207
CAPACITY: 700 LBS.
ENGINE SUPPORT BAR

Sunex Tools 5207 Specifications

General

Model	5207
Type	Socket Set
Drive	1/2"
SAE/Metric	SAE
Point	12-Point
Product Type	Socket Set

Summary

Specifications

Warning Information

Important: Read Before Operating

Emphasizes the critical need to read and understand the entire manual before using the tool.

Nature of Hazardous Situations

Methods to Avoid Hazardous Situations

Provides actionable safety guidelines and precautions to prevent accidents and injuries.

Consequences of Not Avoiding Hazards

Setup and Assembly Instructions

Component Installation

J-Hook Installation

Operating Instructions

Bar Placement and Adjustment

Instructs on positioning the support bar, securing it, and adjusting components.

Cable and J-Hook Attachment

Explains how to attach cables to the engine and J-hooks for proper support.

Preventative Maintenance

Pre-Use Inspection

Inspection Procedures

Damage and Wear Checks