Sunex Tools SX243 User Manual

SX243: Parts Breakdown & Operating Manual 1 Rev. 09/20/11
Collet Opening ...........0.401" (10.19mm)
Blows per Minute .................2,200 BPM
Bore Diameter.....................3/4" (19mm)
Piston Stroke ............. 3-3/4" (95.25mm)
Weight ........................ 4.6 Lbs. (2.09 kg)
Length ........................8.88" (225.55mm)
SX243
Heavy
duty long
barrel air
Hammer
witH quick
cHange cHiSel
retainer
Average Air
Consumption .............. 4 CFM (91 l/min)
Air Inlet ..................................... 1/4" NPT
Minimum
Hose Size ..................... 3/8" I.D. (10mm)
Sound Level ..............................110 dBA
SPECIFICATIONS
AVOID PROLONGED EXPOSURE TO VIBRATION
WEAR HEARING PROTECTION
ALWAYS WEAR SAFETY GOGGLES
ALWAYS READ INSTRUCTIONS BEFORE
USING POWER TOOLS
WARNING
Operating Instructions • Warning Information • Parts Break down

Sunex Tools SX243 Specifications

General

Brand	Sunex Tools
Model	SX243
Category	Tools
Language	English

Summary

Warning Information

General Safety Warnings

Always read instructions before using power tools and wear safety goggles and hearing protection.

Specifications

Safety Instructions

Additional Safety Warnings

Do not modify the tool, use in explosive atmospheres, or underwater. Operators must be physically able.

Parts Breakdown

Operating Instructions

Air Supply

Operate at 90 PSI, use clean dry air, drain tank daily, clean air inlet filter weekly.

Lubrication

Lubricate daily with SAE #10 air motor oil via air inlet or hose.

Troubleshooting

Check for reduced compressor output, air line drain, moisture, or restrictions. Clean tool if needed.

Operation

Place chisel, hold tool down, throttle only when against work. Remove chisel when not in use.