Sunex Tools 7752C User Manual

1
MODEL 7752C OPERATING MANUAL & PARTS BREAKDOWN
Rev. 12/22/99
Model 7752C transmission
jack is a mobile lifting
device having a lift
platform assembly suited to
retaining an automotive
transmission, and other
driveline components such
as transfer cases and trans-
axles, and is designed to
support and stabilize the
component during its
installation or removal from
a vehicle.
7752C
1-1/2 Ton Capacity
Heavy Duty
Transmission Jack
Low Height . . . . . . . . . . . . . . . . . . . . . . 9"
Raised Height . . . . . . . . . . . . . . . . . . . 37"
Hydraulic Lift
. . . . . . . . . . . . . . . . . . . . 28"
Saddle Forward Tilt . . . . . . . . . . . . . . . . 30°
Saddle Backward Tilt . . . . . . . . . . . . . . . 15°
Saddle Side Tilt
. . . . . . . . . . . . . . . . . . ±12°
Base Size . . . 44-1/2" x 25-1/2" x 11-3/8"
Shipping Weight . . . . . . . . . . . . . . .300 Lbs.
P.O. Box 4215 • Greenville, SC 29608
7752C_OpMan_020805.indd 1 2/8/05 12:09:40 PM

Sunex Tools 7752C Specifications

General

Brand	Sunex Tools
Model	7752C
Category	Jacks
Language	English

Summary

Assembly and Pre-Operation Checks

Purge Air

Procedure to remove trapped air from the hydraulic system before operation.

Inspection Before Use

Visual inspection for leaking fluid, damaged, loose, or missing parts.

Operation and Maintenance

Operating Instructions

Steps for lifting, positioning, tilting, and securing a load with the transmission jack.

Maintenance Instructions

Guidance on lubricating moving joints, handle socket, and pivot shaft.

Owner Responsibility and Warranty

Owner/User Responsibility

Understanding instructions, safe operation, and maintaining manuals/labels.

Warranty Notice

Details on warranty coverage, exclusions, and service claim procedures.