3
MODEL 7752C OPERATING MANUAL & PARTS BREAKDOWN
Rev. 12/22/99
WARRANTY NOTICE
Sunex shop equipment and tools, excluding
accessories, are warranted against defects in
materials or workmanship for a period of 1 year from
original purchase. We will repair or replace at our
option any defective part or unit which proves to be
defective in material or workmanship within this warran
-
ty plan. This warranty does not cover damage to equip
-
ment or tools arising from alteration, abuse or misuse,
and does not cover any repairs or replacement made
by anyone other than Sunex or its authorized
service centers.
The foregoing obligation is Sunex Tools sole liability
under this or any implied warranty and under no
circumstances shall we be liable for any incidental or
consequential damages.
NOTE: Some states do not allow the exclusion or
limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you.
Return equipment or parts to Sunex Tools, 315 Hawkins
Road, Travelers Rest, SC 29690, or to an authorized
service center, transportation prepaid. Be certain to
include your name and address, evidence of the
purchase date, and description of the suspected defect.
If you have any questions about warranty service,
please write to Sunex Tools, P.O. Box 4215, Greenville,
SC 29608. This warranty gives you specific legal rights
and you may also have other rights which vary from
state to state.
WARNING
THE USE OF THIS JACK IS LIMITED TO
THE REMOVAL, INSTALLATION, AND
TRANSPORTATION IN THE LOWERED
POSITION, OF TRANSMISSIONS AND
DIFFERENTIALS. IT MAY BE USED
WITH APPROPRIATE ADAPTERS
MANUFACTURED SPECIFICALLY FOR
THE JACK TO HANDLE OTHER COMPONENTS, SUCH AS
REAR AXLE UNITS AND TRANSFER CASES, WITHIN THE
WEIGHT LIMITATIONS SPECIFIED. NO ALTERATION TO
THE JACK OR ADAPTERS SHALL BE MADE.
BE SURE THE VEHICLE IS APPROPRIATELY SUPPORTED
BEFORE STARTING REPAIRS.
Do NOT Overload. Overloading can Cause Damage To or
Failure of the Jack.
ONLY ATTACHMENTS AND/OR ADAPTERS SUPPLIED BY
THE MANUFACTURER SHALL BE USED.
This Jack is Designed for Use Only on Hard Level
Surfaces Capable of Sustaining the Load. Use on Other
than Hard Level Surfaces Can Result in Jack Instability
and Possible Loss of Load.
Read, Study and Understand the Operating Manual
Packed with this Jack Before Operating.
Failure to Heed These Warnings May Result in Loss
of Load, Damage to Jack, and/or Failure Resulting in
PROPERTY DAMAGE, PERSONAL OR FATAL INJURY.
To Next Page
Loading...
