Sunex Tools 7796 User Manual

7796 Rev. B 1 rev. 01/23/17
Required Air Pressure ............................................100 psig
Low Height ...................................................................... 35"
Raised Height .............................................................. 73.5"
Saddle Forward Tilt .........................................................37º
Saddle Backward Tilt ......................................................26º
Saddle Lateral Tilt .................................... 12º left and right
Base ............................................................. 30-1/4" square
Shipping Weight .....................................................167 Lbs.
SPECIFICATIONS
CONTENTS:
Page 1 Specifications
2 Warning Information
3 Setup, Operating and Maintenance
4 Trouble Shooting and Warranty Information
5 Exploded View Drawing
6 Replacement Parts
© Copyright 2017, Sunex Tools
®
7796 (Rev. B)
1/2 TON AIR & HYDRAULIC
TRANSMISSION JACK
OWNER'S MANUAL

Sunex Tools 7796 Specifications

General

Model	7796
Capacity	2 Ton
Material	Steel
Air Pressure	Not Applicable
Min. Height	3.5 inches
Max. Height	14 inches

Summary

Specifications

Warning Information

Nature of Hazardous Situations

Explains inherent hazards in using lifting devices and the need for user care and qualification.

Methods to Avoid Hazardous Situations

Lists critical safety practices for operating the transmission jack to prevent injury.

Consequences of Hazardous Situations

Details potential outcomes of not following safety instructions, including serious injury or death.

Setup Procedure

Purging Air from Hydraulic System

Step-by-step guide to remove air from the hydraulic system for proper function.

Operating Instructions

Jack Operation

Details the steps for safely lifting and positioning the transmission.

Preventative Maintenance

Troubleshooting

Parts Drawing

Parts List