To Next PageTo Next PageHow to fix Sunex Tools Jacks that will not lift rated load?
If your Sunex Tools Jacks unit isn't lifting the rated load, you should purge air from the hydraulic system by following the setup procedure.
What to do if Sunex Tools 7790 Jacks will not lift to full height?
If your Sunex Tools Jacks unit isn't lifting to its full height, you should purge air from the hydraulic system or check the oil level in the reservoir.
What to do if Sunex Tools 7790 Jacks unit feels spongy?
If your Sunex Tools Jacks unit won't sustain the rated load or feels spongy under the rated load, you should purge air from the hydraulic system.
How to fix Sunex Tools Jacks if it won't lift to full height?
If your Sunex Tools Jacks unit does not lift to its full height, you should purge air from the hydraulic system or check the oil level in the reservoir.
General| Brand | Sunex Tools |
|---|---|
| Model | 7790 |
| Category | Jacks |
| Language | English |
Crucial guidance before device use.
Explains inherent risks of portable lifting devices.
Practical steps for safe operation.
Outlines potential severe outcomes from ignoring safety measures.
