EasyManua.ls Logo

Sunex Tools 8013ADELUXE User Manual

Sunex Tools 8013ADELUXE
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
8013ADELUXE, 8013ABKDELUXE, 8013ABLDELUXE 1 rev. 09/10/19
8013ADELUXE, 8013ABKDELUXE, 8013ABLDELUXE
SERVICE CART WITH LOCKING TOP & DRAWERS
INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH
© Copyright 2019, SunexTools
®
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
• It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility
of the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are
lost or not legible, contact Sunex Tools
®
for replacements. If the operator is not fluent in English, the product and safety instructions
shall be read and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making
sure that the operator comprehends its contents. • Read and follow all instructions in User’s Manual. • Do not load carts beyond
rated capacity of 350 lbs. (175 lbs. per shelf). • Lock lid and drawers before moving. • Apply brake on locking casters anytime cart
is in place. • Do not pull cart. Push from handle on end to move. • Units can tip or fall causing damage or personal injury. • Do not
stand on or step in drawers. • Do not open more than one loaded drawer at a time. • Cart is designed to roll easily on flat surfaces
and should not be used on uneven or inclined surfaces. • Keep children away from unit. • Wear gloves when lifting by edges.
• Failure to heed these warnings may result in personal injury and/or property damage.
WARNING
Chrome Legs (2)
(With Inserts Installed)
Keys
(Attached
to Legs)
Locking Casters (2)Non-Locking Casters (2)
Locking Drawer Assembly
Bottom Tray
Pry Bar Holder Side Work Bench
Rubber Mallet Table or Workbench6mm WrenchPhillips® Head
Screwdriver
2 People
Long Drawer
Handle (1)
Drawer Handle
Screws (14)
Short Drawer
Handles (4)
TOOLS NEEDED
Examine box contents, then proceed with following instructions.
M6x42 Bolts, Nuts,
& Washers (8 Pcs. Each)
OPERATING MANUAL
PARTS LIST
Question and Answer IconNeed help?

Do you have a question about the Sunex Tools 8013ADELUXE and is the answer not in the manual?

Sunex Tools 8013ADELUXE Specifications

General IconGeneral
BrandSunex Tools
Model8013ADELUXE
CategoryOutdoor Cart
LanguageEnglish

Summary

OPERATING MANUAL

Parts List and Tools

Lists all components and necessary tools for assembly.

Safety Warnings

Provides crucial safety information and warnings for product use.

ASSEMBLY INSTRUCTIONS

Initial Component Setup

Prepares workspace and places initial components for assembly.

Frame and Tray Assembly

Connects legs, side accessories, bottom tray, and tightens all bolts.

Finishing Touches

Details attaching drawer handles and casters.

PARTS BREAKDOWN

Detailed Parts List

Provides a detailed list of all parts and their quantities.

Optional Accessories

Lists additional accessories available for purchase.

Related product manuals