Sunex Tools SX288C User Manual

SX288C: Parts Breakdown & Operating Manual 1 11/03/14
SX288C
DUAL PISTON STRAIGHT
LINE SANDER
Pad Size .................................................................. 16" x 2-1/2"
Stroke Length ......................................................................... 1"
Stroke Per Min .................................................................... 2500
Avg. Air Cons. .................................................................. 8 CFM
Rec. Air Pressure ............................................................90 psig
Sound Pressure Level. ...................................................93 dBA
Height ..............................................................................6-3/16"
Length ................................................................................... 16"
Shipping Wt. ...................................................................... 7 lbs.
Hose Diameter .............................................................. 3/8" I.D.
SX288C SPECIFICATIONS
Operating Instructions • Warning Information • Parts Break down
© Copyright 2014, Sunex Tools
®
READ THIS MANUAL BEFORE OPERATING
TOOL.
ALWAYS WEAR EYE PROTECTION AND
BREATHING APPARATUS WHEN OPERATING
OR PERFORMING MAINTENANCE ON THIS
TOOL.
ALWAYS WEAR HEARING PROTECTION
WHEN OPERATING THIS TOOL.
AVOID PROLONGED EXPOSURE
TO VIBRATION
WARNING
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• leadfromlead-basedpaints,
• crystallinesilicafrombricksandcementandothermasonryproducts,and
• arsenicandchromiumfromchemically-treatedlumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
WAR NING

Sunex Tools SX288C Specifications

General

Brand	Sunex Tools
Model	SX288C
Category	Sander
Language	English

Summary

SX288C Specifications

General Operating Warnings

Essential safety precautions for operating the tool, including eye, breathing, and hearing protection, and vibration awareness.

Health Hazard Warnings

Information regarding chemical exposure from dust, outlining risks and precautions for reducing exposure.

Important Safety Information

General Safety Instructions

Mandatory safety procedures for operation, maintenance, and tool handling, including compliance and physical readiness.

Safe Operation Practices

Guidelines for safe tool usage, covering hazards like vibration, air pressure, moving parts, and proper handling.

Specific Hazard Warnings

Warnings related to specific environmental conditions and product content, such as explosive atmospheres and chemical composition.

Air Supply Requirements

Air Pressure and Quality

Details on recommended air pressure, air quality, hose diameter, and fittings for optimal tool performance and safety.

Lubrication Procedures

Instructions for daily lubrication of the air motor using high-quality air tool oil and safety precautions during lubrication.

Tool Operation Guide

Steps for operating the sander, mounting sandpaper, applying pressure, and changing sandpaper when worn.

Parts Breakdown

Component Identification

A detailed list and diagram of all parts for the SX288C Dual Piston Straight Line Sander.

Limited Warranty

Warranty Terms and Conditions

Information on the one-year warranty, coverage, exclusions, and procedures for warranty claims and returns.