Troubleshooting
How does oscillation happened:
1. Indoor antenna receive leak signal from the outdoor antenna;
2. Booster amplify the signal and then transmit it to the outdoor antenna;
3. Outdoor antenna broadcast the signal in the air, some of the signal
back to indoor antenna and become leak signal;
4. If the gain of the booster higher than the loss of the leak signal, the
leak signal will become bigger and bigger, finally oscillation happened.
How to confirm that oscillation has occurred:
1. Panel light flash or solid red/orange after power on;
2. Screw off the indoor antenna from the booster;
3. Restart the power supply;
4. All indicator lights flash once time after power on show self-test
finished;
How to solve the problem of oscillation:
Keep enough distance between indoor and outdoor
antenna
Minimum Required Separation Distance Between Indoor and Outdoor
Antennas:
Straight line distance over 40 feet(12 meters) or
30 feet (9 meters) horizontal distance
20 feet (6meters) vertical distance (as far as possible).
14
To Next Page
Loading...
