SunFounder PiDog Kit, Release 1.0
5. Configure the remaining 3, 4, 5, 6, 7, 8 servos in turn, and calibrate all four feet .
2.2.2 Wake Up
This is PiDog’s first project. It will wake your PiDog from a deep sleep.
Run the Code
cd /home/pi/pidog/examples
sudo python3 1_wakeup.py
After the code is executed, PiDog will perform the following actions in sequence:
Stretch, twist, sit, wag its tail, pant.
Code
Note: You can Modify/Reset/Copy/Run/Stop the code below. But before that, you need to go to source code path
like pidog\examples. After modifying the code, you can run it directly to see the effect.
2.2. Funny Project 47
To Next Page
Loading...
