Need help?Do you have a question about the SunFounder 3in1 Kit and is the answer not in the manual?
Overview of the Arduino Uno R4 Minima, its features, and specifications.
Introduction to the ESP8266 Wi-Fi module, its capabilities, and pin functions.
Explanation of breadboard construction, usage, and internal connections for prototyping.
Details on resistors, circuit symbols, color codes, and methods to determine resistance.
Description of LEDs, polarity, forward voltage, and the need for current limiting resistors.
Introduction to the I2C LCD1602 module for displaying characters and numbers.
Details on the DHT11 sensor for measuring temperature and humidity.
An overview of Arduino as an open-source electronic prototyping platform.
Steps for downloading and installing the Arduino IDE and building a project.
Controlling digital pins to output HIGH or LOW signals for components like LEDs.
Using PWM signals to control LED brightness or motor speed via analogWrite.
Reading the status of digital sensors like buttons using digitalRead.
Reading analog sensor values using analogRead and the ADC converter.
Exploring programming concepts like if-else, variables, and functions.
Step-by-step instructions for assembling the robot car chassis and components.
Understanding the L9110 motor driver and controlling motor direction for movement.
Programmatically controlling car movement (forward, backward, left, right) via code.
Implementing line following behavior using the Line Tracking module.
Using an ultrasonic module for obstacle detection and car control.
Combining sensors for autonomous obstacle avoidance and navigation.
Controlling car movement using an IR remote control.
Calibrating motor speeds for straight-line movement using EEPROM.
Setting up the ESP8266 module and connecting to the Blynk platform.
Controlling LEDs and reading sensor data via Blynk widgets and virtual pins.
Sending sensor data (e.g., Reed Switch) to Blynk for remote monitoring.
Monitoring temperature, humidity, and light intensity via Blynk.
Creating a smart watering system with sensor data displayed on Blynk.
Controlling a car remotely using Blynk and a joystick via WiFi.
Guide to using Blynk features and widgets on a mobile device.
Instructions for reflashing ESP8266 firmware for proper operation.
General| Brand | SunFounder |
|---|---|
| Model | 3in1 Kit |
| Category | Robotics |
| Language | English |
To Next Page
