TS7-Pro 7-inch Touch Screen
Booting RPi from Hard Disk
To boot Raspberry Pi with Hard Disk, you need to update the Bootloader of Raspberry Pi, then install Raspberry Pi
OS on Hard Disk, and finally reboot Raspberry Pi and Hard Disk.
You have 2 methods.
Using Raspberry Pi Imager: This method is recommended for newbies, it is easy to operate and less error-prone.
But this method will make you lose the contents of your Micro SD card.
Using Commands: For users with basic knowledge, you can use this method if you don’t want to lose the data of your
Micro SD card.
• Using Raspberry Pi Imager
1. Download Raspberry Pi Imager.
2. Select a spare SD card (the data will be erased), then insert it into your computer using the reader.
3. Launch Raspberry Pi Imager and click CHOOSE OS.
40 Chapter 4. ADDING PERIPHERAL DEVICES
To Next Page
Loading...
