TS7-Pro 7-inch Touch Screen
5.3.4 Video
The following video shows that after installing OctoPrint, connect your 3D printer and this screen through a USB
cableupload the designed 3D file, and then use the camera to monitor the printing process.
The temperature can also be monitored to prevent the 3D printer from getting too hot or cold, which will affect the
printed 3D model.
5.4 Home Assistant
Home Assistant is a Python-based open source smart home system that supports smart home devices of many brands
and can easily implement voice control and automation of the devices. You can run Home-assistant on the Raspberry
Pi, without having to send your data out onto the internet. This means that you have total control over your data, limit
the amount of internet traffic from your smart devices, and tighten up security.
Expand Viewing
Here are some projects made by others that combine Raspberry Pi and Home Assistant.
• My cheap smart home system | HomeAssistant Wall Panel - AGT Designs
• Getting started with Home Assistant - JuanMTech
• DIY Home Automation Intruder Alarm System! || Home Assistant + Raspberry Pi + ESP8266 - GreatScott!
Quick Guide
5.4. Home Assistant 77
To Next Page
Loading...
