Sungrow SBR Series User Manual

GD_202111_Sungrow SBR HV Battery Installation Quick Guide with SHRT _V3.0
Page 5 of 6
© Sungrow Australia Group Pty. Ltd. All rights reserved.
As we continuously improving our services, changes to this document may occur without notice.
COMM connection on inverter side
Standard cable provided by Sungrow connected to COM 2 (green plug)
– Pin 1&3 are for smart meters
– Pin 5&7 are for battery’s CAN connection
7. Put on the lid and fix it with the Stud ‘H’.
Note: Directly use the Stud ‘H’ fix the lid, breaker module and the battery if the battery is
SBR096 (3 modules).

Sungrow SBR Series Specifications

General

Battery Type	Lithium iron phosphate (LFP)
Nominal Voltage	51.2 V
IP Rating	IP65
Cooling	Natural convection
Operating Temperature Range	-10°C to 50°C
Communication	CAN
Protection Level	IP65
Cycle Life	>6000 cycles (70% EOL)
Communication Interface	CAN