User Manual 1 Safety Instructions
2
There is a risk of injury due to improperly handling the device!
Always follow the instructions in the manual when moving and
positioning the inverter.
Injuries, serious wounds, or bruises may occur if the device is improperly
handled.
During Mechanical Installation
ot electrically connected before installing the
System performance loss due to bad ventilation!
Proper-
ventilation should be maintained during device operation. the fan’s
air inlet and outlet should not be covered to ensure the device interior can
sufficiently cool down.
During Electrical Connection
All electrical connections
must be in accordance with national and local
standards.
The connection to the grid can be done only after receiving approval from
the local utility grid company.
Lethal voltage exists!
PV arrays will produce electrical energy when exposed to sunlight and thus can
create potential electrical shock hazards.
All cables must be firmly attached, undamaged, properly insulated and
To Next Page
Loading...
Need help?
General
