1
1 Safety Instructions
The inverter has been designed and tested according to strict international safety
regulations. As electrical and electronic equipment, safety instructions related to
them must be complied with during installation, commissioning, operation and
maintenance. Incorrect operation or work may result in damage to:
The life and well-being of the operator or a third party
The inverter and other properties that belong to the operator or a third party
Therefore, the following general safety instructions must be read and always kept in
mind prior to any work. All detailed work-related safety warnings and notes will be
specified at the critical points in corresponding chapters.
All installations should be performed by technical personnel. They should
have:
received professional training;
read through this manual and understood all related safety instructions;
been familiar with electric system related safety instructions.
Technical personnel mentioned above may perform the following work:
Install the inverter in a proper place;
Connect the inverter to the PV system;
Connect other devices to the PV system;
Commission the inverter;
Operate and maintain the inverter.
Before Installation
The unit is thoroughly tested and strictly inspected before delivery. Damage
may still occur during shipping.
If there is visible damage to the packaging or the inner contents, or if there
is something missing, contact Sungrow or the forwarding company.
To Next Page
Loading...
Need help?
General
