Sungrow SG125CX-P2 User Manual

User Manual 4 Mechanical Mounting
Item Quantity Specification Source
Clamp 3 Determined by pole size Self-prepared
step 1 Bury the pole into the installation site.
Please skip this step if the inverter is to be installed on a concrete post, PV bracket, etc.
step 2
Assemble the mounting-bracket.
step 3
Mark and punch holes in the U-beam according to the dimensions shown below.
step 4
Use bolts and clamps to fix the U-beam to the pole.
31

Sungrow SG125CX-P2 Specifications

General

Max. DC Voltage	1100 V
Rated AC Power	125 kW
Max. DC Power	150 kW
Start-up Voltage	200 V
MPPT Voltage Range	200 V - 1000 V
Max. Short-circuit Current per MPPT	40 A
Max. AC Power	137.5 kW
Max. AC Current	198 A
Rated AC Voltage	400 V
Rated Grid Frequency	50/60 Hz
Total Harmonic Distortion	<3%
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
DC Connection Type	MC4
Protection Class	IP66
Maximum DC Input Power	150 kW
DC Inputs per MPPT	2
Cooling Method	Smart forced air cooling
Operating Temperature Range	-25°C to +60°C
Humidity Range	0 - 100%
Communication	RS485, Ethernet